No products in the cart.
SEBA KLL-S Sampler
Category: Water Quality – Cable electric contact gauges, Probe jack
- Mechanically lockable sampler with 0.5 or 1 liter capacity for 2″ or 4″ groundwater monitoring points
- Connects to SEBA electric contact gauges KLL type (electric water level gauge)
- Easily disassembled and cleaned
Benefits
Proven and reliable: With the KLL-S, it is possible to take fluid samples down to a single centimeter of the desired depth. For this purpose, a casing tube is suspended above the piston. Upon reaching the sampling depth, a shutter mechanism is triggered by a falling weight that pushes the casing above the pistons. The fluid sample can then be easily recovered with the hand crank on the KLL-S and removed with a drain cock.
More than just a probe jack: The threaded connection of the optical probe offers its user many additional capabilities and features in addition to the sampling. So, the KLL-S may alternatively be used as a conventional cable contact gauge for water level measurement and in conjunction with a basic button for depth sounding. For measuring points with high or very low salinity and muddy ground, special solder compounds are available.
Application
- Sampling in groundwater monitoring sites from Ø2″ and in stagnant waters (lakes, reservoirs)
Accessories
Leather bag
Carrier case
Acoustic signal
Basic button
Saltwater probe cap
Probe cap for high or non-conductive liquids
Loading weight: 450g/800g
Electric drive
Specifications
Parameters: Water level [cm], [dm], [m]
Sensor: Vertical
Measurement principle: electric contact
Housing (vertical) Material: stainless steel, nickel-plated brass tip
Dimensions: Ø14mm, length: 175mm, Option: Ø10mm, length: 320mm
Protection class: IP68
An electric water level gauge
Support frame: Aluminum, surface-coated
Cable drum: Impact-resistant, temperature-resistant plastic
Protection class: IP54
Cable Lengths: 0-15/30/50/80/100/150/200/300/500m
Material: 2-core flat cable, polyethylene with stainless steel braids and a copper core
Scaling: Black cm-division, dm-numbering, red meter figures
Accuracy: <1 cm (KLL 100m)
Power supply: 4 x 1.5V alkaline manganese batteries
Operating temperature: -15°C – 50°C
Weight: Depending on cable length, see the KLL Brochure
probe jack
Housing Material: Aluminum, stainless steel, POM
Casing pipe: Anodized aluminum or transparent PVC
Dimensions: KLL-S 2 “Ø49mm, length: 1750mm, 0.5-liter capacity
Be the first to review “SEBA KLL-S Sampler”
Related products
Meteorology
Waste Water
Waste Water
Waste Water
Waste Water
Server
Waste Water
Meteorology
Reviews
There are no reviews yet.