No products in the cart.
Multiparameter probe MPS-K16/Qualilog16
Call for Price
Category: Water Quality – Sensors
- Robust, pluggable multiparameter sensor made of plastic (PVC-U) for mounting up to twelve sensors (water level, temperature, conductivity, pH, redox potential, oxygen, turbidity, ammonia, nitrate, chloride, ammonium, sodium, calcium, fluoride, potassium, chlorophyll or cyano-bacteria-rhodamine WT)
- Additional electric contact gauge function combined with KLL-Q-2 mobile field laboratory
- Optimized design (Ø 89 mm, 572 mm length), usable starting from a 4″-diameter pipe
- Output: RS485 (SHWP), Option: MODBUS, SDI-12, 0/4-20 mA
- Optional: integrated, high-performance SEBA data logger Qualilog16 (for stationary use)
Benefits
Individually configurable: Depending on the measurement task at hand, the MPS-K16 can be individually equipped with a maximum of twelve water quality sensors and can detect up to 17 measurement parameters.
Simple handling: Special bayonet locks grant the users a simple and quick replacement of worn sensors. The calibration and configuration of the MPS-K16 are done by means of a special USB-RS485 interface cable in connection with SEBAConfig operation software (Windows). This will automatically detect if a probe is spent and must be replaced.
Robust: The housing of the MPS-K16 is made of durable plastic (PVC-U). The probe can thus be used even under adverse ambient conditions (e.g. landfill sites, contaminated sites).
Variable: The proven and robust SEBA-connect feature of the MPS-K16 allows both the connection to mobile handsets (SEBA electric contact meter, KLL-Q-2, Checker-2) and stationary data collectors with (UniLogCom, LogCom/FlashCom) or without data transmission (Qualilog16).
Application
- Water quality monitoring in surface waters: rivers, canals, springs, and lakes
- Groundwater: extraction wells, field measurement sites, landfill, and construction sites
- Other applications: discharge monitoring
Accessories
Data collector:
External:
Internal: Qualilog16
Electric water level gauge (KL):
Handset:
Calibration: Dual converter (USB/RS232 – RS485)
Operating software:
- SEBAConfig (Windows)
Specifications
Parameter: Water level [cm], [m]
Sensor: Relative pressure probe
Measuring principle: Capacitive with ceramic measurement cell
Measuring range: 0-2 / 1 /4/ 5/ 20/ 40/ 100 / 200m Water column or according to specification
Measuring accuracy: ± 0.1% FS
Long-term stability: ± 0.1% / year
Parameter: Water temperature [° C]
Sensor: NTC30 with polynomial linearization
Measuring Principle: NTC resistor
Measuring range: -5 – + 50 ° C
Measuring accuracy: 0.1 ° C
Resolution: 0.01 ° C
Pressure range: 0-50 bar
Parameter: Water temperature [° C]
Sensor: NTC30 with polynomial linearization
Measuring principle: NTC resistor
Measuring range: -5 – + 50 ° C
Measuring accuracy: 0.1 ° C
Resolution: 0.01 ° C
Pressure range: 0-50 bar
Parameter: Conductivity [μS / cm], [mS / cm]
Derived parameters: Solutes [g / l], salinity, density [g / l]
Sensor: 4-electrode measuring cell
Measuring range: 0-200mS / cm (total) automatic
Measuring range switching: 0-200μS / cm; 0.2-2mS / cm; 2-20 mS / cm; 20-200 mS / cm
Measuring accuracy: ± 1μS / cm at measuring range 0-200μS / cm; +/- 0.5% with measuring range 0.2-200mS
Resolution: 0.0001 mS / cm
Temperature: -5 ° C-50 ° C
Pressure range: 0-50 bar
Parameter: PH value [pH]
Sensor: Glass electrode
Measuring range: 0-14pH
Measuring accuracy: ± 0.1pH
Resolution: 0.01pH
Temperature: 0-50 ° C
Pressure range: 0-20 bar
Parameter: Redox [mV]
Sensor: Glass electrode
Measuring range: -1200mV-1200mV
Measuring accuracy:
Resolution:
- ± 10mV
- 1mV
Temperature: 0-50 ° C
Pressure range: 0-20 bar
Parameter: Oxygen [mg / l]
Derived parameters: Oxygen saturation [%]
Sensor: Clark electrode (amperometry)
Measuring range: 0-40mg
Measuring accuracy: ± 0.5% FS
Resolution: 0.01mg / l
Temperature: 0-50 ° C
Pressure range: 0-10 bar
Alternatively: Oxygen [mg / l]
Sensor:
Measuring range: 0-25mg / L (at 25 ° C, 1013hPa) 0-40mg / L (at 3 ° C, 1013hPa)
Measuring accuracy: ± 0.5% FS
Resolution: 0.001mg / l
Temperature: -5 ° C-50 ° C
Pressure range: 0-12 bar
Sensor: Turbidity [NTU]
Derived parameters: Suspended substances [mg / l] optically
Measuring range: 0-1000 NTU and 0-5000 NTU
Measuring accuracy: ± 1% of the respective end of measuring range
Resolution: ± 0.0125 % of the respective end of measuring range
Temperature: 0-50 ° C
Pressure range: 0-10bar (with wiper) 0-20bar (without wiper)
Further possible parameters for MPS-K16:
Housing Material: PVC-U
Dimension: Ø89
Length: 572mm
Protection class Probe: IP68
RS485 interface: IP67 (immersion depth with dry cartridge up to 3m, depending on cable length)
Pressure range: 0-12 bar
Outputs: RS485 (SHWP) Standard, MODBUS, SDI12, 4-20mA (option)
Communication Interface: RS485
Power supply: 4-15VDC or 8-15VDC with optical sensors
Operating temperature: Parameter-dependent
Mounting depth: Up to 1000m
Electric wire: Reinforced cable with pressure compensation line
Gore-Tex membrane, dry cartridge with Silica Gel for the protection of the pressure compensation line
Be the first to review “Multiparameter probe MPS-K16/Qualilog16”
Related products
Server
Call for Price
Surface Water
Call for Price
Server
Call for Price
Waste Water
Call for Price
Waste Water
Call for Price
Meteorology
Call for Price
Hydrology
Call for Price
Waste Water
Call for Price
Reviews
There are no reviews yet.