MPS-D3 Multiparameter sensor
Call for Price
Category: Water Quality – Sensors
- The robust, pluggable multiparameter sensor of 1.4404 stainless steel, accommodating up to three sensors
- Additional electric contact gauge cable combined with KLL-Q-2 mobile field laboratory
- Slim design (40 mm diameter, 400 mm length), can be used within a 1.5″ pipe diameter
- Output: RS485 (SHWP), Optional: MODBUS, SDI-12, 0/4-20 mA
Benefits
Individually configurable: Depending on the measurement task, the MPS-D3 can be equipped with up to three water-quality sensors (parameters: pressure, temperature, and conductivity).
Robust: Standard version of 1:44.04 stainless steel, optionally available in titanium for extreme operating conditions, e.g. for swelling pressure measurements of up to 80 bar.
Variable: The proven and robust SEBA-connect feature of the MPS-D3 allows both the connection to mobile handsets (SEBA KLL-Q-2 Type electric water level gauge (KLL), Checker-2) or to stationary data collectors with (UniLogCom, LogCom/FlashCom) and without data transmission (Qualilog8).
Application
- Monitoring of water level, water temperature, and other parameters
- In surface waters: rivers, canals, springs, lakes
- In groundwater: extraction wells,field-measurement locations, landfill sites, construction sites
- Other applications: discharge monitoring, swelling pressure measurement
Accessories
Data collector:
Electric water level gauge (KL): KLL-Q-2
Handset: Checker-2
Calibration: Dual Converter (USB, RS485)
Operating software: SEBAConfig (Windows)
Specifications
Parameters: Water level [cm], [m]
Sensor: Relative pressure probe
Measurement principle: Capacitive with ceramic measuring cell
Measuring range: 0-2 / 1 /4 /5 /20 /40 /100 / 200m water column or according to specifications
Measuring accuracy: ± 0.1% FS
Long-term stability: ± 0.1% / year
Option Sensor: Absolute pressure probe
Measurement principle: Piezoresistive with measuring cell made of titanium
Measuring range: 25 /30 /40 /50 /60 /70 /80 bar or as specified
Measuring accuracy: ± 0.1% FS
Long-term stability: ± 0.1% / year
Parameters: Water temperature [°C]
Sensor: NTC30 with polynomial linearization
Measurement principle: NTC resistance
Measuring range: -5 – +50°C
Measuring accuracy: 0.1°C
Pressure Range: 0-50 bar
Parameters: Conductivity [µS/cm], [mS/cm]
Derived parameters: solutes [g/l], salinity, density [g/l]
Sensor: 4-electrode measuring cell
Measuring range: 0-200mS/cm (total)
Automatic measuring range switchover: 0-200µS/cm; 0,2-2mS/cm; 2-20mS/cm; 20-200mS/cm
Measuring accuracy: ± 1µS/cm for measuring range of 0-200µS/cm +/- 0,5% for measuring range of 0,2-200mS
Pressure Range: 0-50 bar
Housing Material: 1.4404 stainless steel (standard), titanium (optional)
Dimensions: Ø40mm, length: 400mm
Protection class Probe: IP68
RS485 interface: IP67 (immersion depth with dry cartridge up to 3m, depending on cable length)
Outputs: RS485 (SHWP) standard, MODBUS, SDI-12, 4-20mA (Option)
Communication Interface: RS232
Power supply: 4-15VDC
Operating temperature: -5°C – +50°C (non-freezing)
Hanging depth: Up to 1000m
Cable: Screened special measuring cable with a pressure compensation line
Be the first to review “MPS-D3 Multiparameter sensor”
You must be logged in to post a review.
Related products
Meteorology
Waste Water
Surface Water
Waste Water
Hydrology
Waste Water
Waste Water
Waste Water
Reviews
There are no reviews yet.