HydroProfiler M-Pro
Call for Price
Category: Discharge Measurement – Complete systems
- Mobile ADCP measuring device for measuring the flow using a Ø 20mm wing rod
- Perpendicular procedure (profile measurement)
- 2-D Doppler, 2 MHz speed sensor
- Integrated water level and temperature measurement
- Flow calculation according to EN ISO 784
Benefits
Innovative: The HydroProfiler M-Pro is operated on a classic Ø 20mm wing bar and comes equipped with an additional, highly accurate pressure measuring cell, which automatically detects the water depth within a measuring vertical. The measured values are transmitted wirelessly via Wi-Fi connection to a rugged tablet PC, in real-time.
High Resolution: HydroProfiler M-Pro sets new standards in measurement resolution. The plumb line is divided into up to 128 measurement cells, with a minimum cell width of 1 mm. Using the two acoustic transducers, both a tilt of the rod and the flow velocity (even if not positioned parallel to the bottom) are automatically compensated.
Efficient: The HydroProfiler M-Pro measures the entire verticals thus obtaining an enormous time advantage over all conventional point measuring methods, magneto-inductive sensors, and other rod ADCs. Flow measurements are particularly efficient when performed by two persons. One person takes the HydroProfiler M-Pro section by section across the measuring cross-section, while the other person operates the HDA-Pro unit, controlling both the measurements and evaluating them.
Variable: The HydroProfiler M-Pro reliably measures in water levels starting from 20 cm and flow velocities of up to 5 m/s, thus covering a wide range of applications.
User-friendly: The user interface of the “HydroProfiler” software is particularly clear and intuitive. At the end of the measurement, the user directly receives the flow rate, the average flow velocity, and the measured cross-section in accordance with DIN ISO 748. In addition, the measuring vertical, the cross-sectional profile, and the velocity distribution are presented in graphical and tabular forms, along with a number of other properties. Even after the measurements are completed, the user can insert additional measuring verticals, or correct or delete existing ones.
Easy data transfer: An XML export interface for the “Biber” software and “Q 3.1” ensures straightforward further processing and archiving of the measurement results.
Last but not least: Included in the delivery, there is a pack for transporting the measurement transducer and the battery, allowing the user to focus on the measurement and the use of the Doppler sensor.
Application
Mobile flow rate measurement in watercourses (rivers, streams, channels) and partly filled pipes of 0.2 m to 3 m in depth and with flow velocities of up to 5 m/s
Accessories
Operating software: HydroProfiler
Sensor carrier: Ø20mm wing bar, handle, level
Power supply: Exchangeable power pack, 6000mAh, rechargeable battery
Measuring device protection: Backpack for transportation of the measurement transducer and power pack (included in the delivery)
Specifications
ADCP sensor Parameters:
- Flow velocity [m/s]
- Sensor: 2-D Doppler sensor, 2MHz
- Measurement principle: Acoustic Doppler Profiler
- Measuring range: 0-5 m/s
- Measuring accuracy: ± 1% of the measured values
- Particle concentration:> 50 ppm
- Number of Cells: 128 (max.)
- Profile sector:15 – 3m
- Cell size:001 m (min.)
- Blanking:02 m
Parameters: Water temperature [°C]
- Sensor: NTC30 with polynomial linearization
- Measurement principle: NTC resistance
- Measuring range: 0°C – 50°C
- Measuring accuracy:3°C of the measured value
Parameters:
- Water level [m]
- Sensor: Absolute Pressure Sensor
- Measurement principle: capacitive with ceramic measuring cell
- Measuring range: 0-4 m
- Measuring accuracy: ±0.1 % of the measured values
Housing Material:
- Plastic
- Dimensions: 195x50x50mm (LxWxH)
- Protection class: IP68
- Fastening: Baseplate (adaptable to 20mm wing bar)
Cable length (Sensor measuring transmitter): 5m (Standard), 10m (optional)
Measurement transducer Housing Material:
- Aluminum
- Dimensions: 225mm x 165mm x 50mm
- Protection class: IP54
Interfaces:
- WLAN incl. a foldable
- WLAN antenna Supply cable with
- 4-pins Plug connector for an external power pack
Power Pack Housing Material: Aluminum
Dimensions: 225mm x 105mm x 50mm
Protection class: IP54
Power supply: Battery, 6000 mAh LiFePO4
Interfaces: 4 pins Socket for connection with the measuring transducer
Other:
- Control button for battery status display
- 4 LEDs to display the battery capacity
- 2 LEDs for charge status indicator
Operating temperature: -25°C – +70°C
Be the first to review “HydroProfiler M-Pro” Cancel reply
Related products
Discharge Measurement
Surface Water
Discharge Measurement
Surface Water
Discharge Measurement
Hydrology
Discharge Measurement
Surface Water
Reviews
There are no reviews yet.