Electric Contact Meter Type KLL-Q-2
Call for Price
Category: Water Quality – Cable electric contact gauges
- Mobile field laboratory with electric cable contact gauge for measuring the water level, temperature and other water quality parameters (e.g. oxygen, pH, conductivity, redox potential, turbidity) in groundwater and surface waters
- SEBA Plug-in System for coupling with SEBA multiparameter sondes of the MPS-D3/D8/K16
- Printed tubular cable with cm/dm/m-scaling, available from 30 m to max. 400 m in length
- 3-line backlit LCD display
- Integrated logger for manual and / or automatic storage of measured values (optional)
Benefits
Individually configurable: The KLL-Q-2 can be adapted and tailored to the desired measuring task. The choices are cable drums of varying sizes with cable lengths of 30 to 400 meters and three multiparameter sensors (MPS-D3/D8/K16), which can be equipped with a variety of water quality sensors.
Versatile applications: The KLL-Q-2 is suitable for the sampling of lakes and reservoirs as well as for monitoring of groundwater measuring points starting from 2″ pipe diameter.
Efficient: The printed round cable allows an exact lowering of multiparameter probe to the desired measuring depth. Thus, profile measurements can be carried out in a very short time. Optionally, an integrated logger is available which automatically stores all relevant measurement data manually by pressing a key as at predetermined intervals.
Compact and user-friendly: The KLL-Q-2 with its robust aluminum support frame can be easily transported from one measuring point to another. For operation and display, the user is equipped with a membrane keypad and LCD. Calibration or adjustment of the sensors using the SEBA operating software is done over the integrated RS232 interface with a connected multiparameter sensor ConfigPC.
Application
Water quality monitoring in ground and surface waters: groundwater monitoring points, wells, landfills, lakes, reservoirs
Accessories
Operating Unit: HDA-Pro
Operating software: SEBAConfig
Storage of measurement values: Integrated logger
Data readout: Interface cable RS232 – USB
Evaluation software: DEMASvis
Archiving Software: DEMASdb
Specifications
Sensor:
- Multiparameter probe MPS-D3 type
- Multiparameter probe MPS-D8 type
- Multiparameter probe MPS-K16 type
Housing Support frame: Aluminum
Cable drum: Shock-resistant plastic
Dimensions: Depending on cable length
Protection class: IP54
Keyboard: 3 multifunction buttons
Display: 3-line backlit LCD
Cables Lengths: 30m/ 50m / 80m/ 100m/ 150m/ 200m/ 300m/ 400m
Material: PE jacket, printed with cm/ dm/ m scaling, food safe
Accuracy: <1cm at 100m cable length
Dimensions: Ø5mm
Logger (option) Controller: 16Bit Flash controller with integrated WatchDog RTC IC Real Time Clock
Memory capacity: 16 MB (= 1.250.000 Messwerte)
Save interval: Manually or cycle-controlled by 2min – 99 hours
Channels: Maximum 32
Measurement routines: Single value, average value, event clock, Delta mode
Communications Interface: RS232
Operation: Interface cable (USB/RS232)
Communications Interface: RS232 (standard)
Outputs: RS485 (SHWP)
Power supply: 4 x 2V lead-acid batteries, rechargeable
Connection: SEBA-plug system (stainless steel) for multiparameter probe of the MPS-D3/D8/K-16 type
Be the first to review “Electric Contact Meter Type KLL-Q-2” Cancel reply
You must be logged in to post a review.
Related products
Server
Waste Water
Waste Water
Waste Water
Waste Water
Waste Water
Waste Water
Waste Water
Reviews
There are no reviews yet.