Data Logger Unilog

Category: Surface water, Water Quality, Meteorology, Waste Water – Data Logger

Wide-ranging applications, high capacity data collector with a total of 32 logical channels
16 MB ring memory for 1,120,000 measurements
Compact plastic housing for wall mounting
Backlit LCD with three multi-function buttons to display current measured values and system states
Configurable analog and digital input channels to connect up to 32 sensors
Mini USB for data transfer (optional)
Connectivity for external GSM/GPRS modem type ModCom, Iridium satellite modem type, etc.

Category: Surface Water Tags: hydrology, Surface Water

Benefits

Efficient: The Unilog is especially characterized by its low energy consumption as well as by its intelligent power management. The power can be supplied (depending on the infrastructure) with a 12 V battery, solar panel, or an external 230 V/ 12 V DC power supply unit.

Variable: Depending on the measurement task, up to 32 logical channels can be managed by the logger. So, for example, it is possible to connect 16 digital DS(T) 22 type SEBA-pressure / temperature probes, or three MPS-D8 multi-parameter sensors via the internal RS485 interface. Using an external A/D converter, up to 32 analog sensors can be connected.

Smart: An alarm management system in Unilog monitors all of the channels. When exceeding predefined thresholds, (for instance during a flood) the measurement intervals can be automatically shortened. Furthermore, when combined with an external modem, shorter transmission intervals (Dynamic Push) are possible. Additionally, upon request, short messages (SMS Alert) can be sent to up to eight receivers.

User-friendly: Two APPs are available for configuration and data readout of UniLog. Operating software ConfigPC (Windows) for beginners has an intuitive user interface (Wizard) for various routine tasks. SEBAConfigApp (Android) and BlueCon (our Bluetooth module) are combined to facilitate configuration and data read-out wireless with a smartphone or tablet, directly from a data logger.

Application

Level measurement in watercourses, lakes, reservoirs
Filling level measurement in flood control reservoirs
Monitoring of thermal plumes, discharge monitoring
Supervision of landfill and waste disposal sites in connection with multi-parameter sensors
Groundwater monitoring in wells, at field measurement and construction sites
Acquisition of meteorological parameters from weather stations

Accessories

Operating software:

SEBAConfig (Windows)
SEBAConfigApp (Android)

Operating Unit:

Data readout:

Interface cable (USB, RS232),
BlueCon 2 (Bluetooth), RS232

Evaluation software: DEMASvis

Archiving Software: DEMASdb

WEB portal: SEBA Hydrocenter

Specifications

Sensors:

DS(T)22
SEBAPuls
LevelSense
Surfloat Sensor 4
PS-Light-2 Sensor
MPS-PTEC
MPS-D3
MPD-D8
MPS-K16
RG50/RG100/TRW
Meteorological sensors

Logger Controller: 32Bit Flash controller with integrated WatchDog, RTC-IC Real-Time Clock

Memory capacity: Internal: 16 MB (= 1,120,000 measurement readings), external: 16GB USB Flash Drive (= 10 million readings)

Save interval: 2min – 99 hours

Channels: max. 32

Measurement routines: Single value, average value, event clock, Delta mode

Communications Interface: RS232 (standard), USB, Ethernet interface (option)

Operation: Interface cable (USB/USB-Mini-RS232), BlueCon 2 (Bluetooth)

Inputs:

Digital: 1 x RS485 (SHWP) for digital SEBA sensors, 1 x pulse, 2 x Contact, 2x RS232/RS485 (Optional)
Analog: 8 x 0-1 V, 0/4-20 mA expandable to 32 analog signals with external A/D converter

Outputs (Option):