Data Logger NetLogCom
Call for Price
Category: Waste Water, Meteorology, Surface water, Groundwater, Water Quality – Data Logger
- High-Performance Datalogger with a total of 100 configurable analog and digital input channels.
- 2GB SD Flashcard for approximately 50 Million measurements
- Compact, aesthetic plastic casing for wall mounting
- Large 320×240 (3,5″) TFT-Colour-Display with membrane keypad for easy configuration and operation of the NetLogCom
- Display of time series in graphical form (guideline, list)
- Integrated measurement and error reporting system including the speaker.
- Integrated 3G Modem (GSM, GPRS, EDGE, UMTS, HSPA+ Modem) or 4G LTE without voice messaging
- Voice-Over IP (VoIP)
- Voice messaging and push operation via different networks (2G/3G)
- Interface: Ethernet (TCP-IP), 2xRS232, 2xRS485, SDI-12, USB-M, USB-S
- IP-Communications: FTP, SFTP, HTTP, HTTPS
- Both network adapters can be used simultaneously (routing)
Benefits
Smart: The NetLogCom station manager is equipped with a TFT color display, keyboard, voice prompter, 3G/4G modem, TCP / IP interface for connecting a DSL router, numerous digital, analog and serial inputs, a generous 2GB flash memory and much more. In short: the perfect data collector, equipped with all the usual communication protocols and formats for modern, up-to-date measurement data acquisition and transmission management 4.0.
Variable: Individual requirements require tailor-made solutions. For this reason, the NetLogCom can be assembled as a modular system, depending on infrastructure and boundary conditions. Do you need even more analog or digital inputs for the connection of additional sensors? Is a redundancy concept with different transmission paths (mobile radio, fixed network) required? Should the stored data be transferred to an S7 process control system? With the NetLogCom, you will quickly discover the possibilities of an intelligent data management system.
User-friendly: The large TFT color display and the keyboard make it very easy for the operator to configure the NetLogCom or to retrieve current status information. In addition, time series in the form of hydro-graphs and lists can be displayed in a clear form on the station manager;
As an alternative, it is also possible to carry out all settings and configurations relevant for the measuring point, in conjunction with a notebook or tablet PC, and with the aid of the “Configuration” operating software.
Powerful: Thanks to the powerful NXP i. MX6 processor, functions, and data access on the NetLogCom run separately and can thus be processed in parallel. This also affects the processing of all interfaces; Particularly noteworthy is the integrated alarm management of the station manager in the case of exceeded limit values. Alarms can be sent by voice, SMS, e-mail, FTP, HTTP, etc. The user can define how best to set various limit values, alarm channels, alarm groups, and up to 32 alarm destinations.
Application
- Water-level measurement in rivers, lakes, dams, locks; Water-level measurement in flood retention basins
- Monitoring of thermal plumes, single-line monitoring, monitoring of landfill and contaminated sites in conjunction with multi-parameter probes, groundwater monitoring in wells, and at large construction sites.
- Detection of meteorological parameters of weather stations
Accessories
Operating software: Configurator
Operating unit: Notebook, HDA-Pro
Antenna:
- GSM 900/1800/1900 MHz / UMTS rod antenna
- GSM 850/900/1800/1900 MHz / UMTS Omni-directional antenna
Data collection: RS232 Interface cable, Network cable
Data collection software: MAWIN (SODA)
Specifications
Sensors:
Digital (SHWP-Protocol):
- DS(T)22
- PS-Light2-Sensor
- Level sense
- MPS-D8/MPS-K16/MPS-PTEC
- Analog (0-10V, 0/4-20mA):
- SEBAPuls (Radar)
- Meteorological sensors
- PT100
Impulse Input:
- RG50/RG100/TRW
- MID, Water counter
RDI/Teledyne: ChannelMaster
Logger Controller:
- Triceps 4: XScale, 32-Bit-ARM-v5TE-Processor
- Triceps 7: NXP i. MX6 ARM Cortex A9
- RTC-IC-real-time clock
Storage capacity: 2GB SD Flashcard for about. 50 Million data measurements
Storage interval: from 10 seconds upwards
Channels: max. 100
Measurement routines: Single value, mid-value, daily minimum-/-maximum, Delta mode
Communications interface: 2x RS232, 2 x RS485, Ethernet (TCP/IP), SDI12, USB, 3G Modem, 4G Modem (Option), optionally ISDN-or Analog-Modem or VoIP (Option)
Operation: RS232 interface cable, TCP/IP, Membrane Keyboard, Modem
Inputs:
- digital: 16 Bit (8 x Impulse), BCD, Gray, Binary, Impulse input (Rain)
- analog: 5 x 0/4-20mA (oder 3 x 0/4-20mA, 2 x 0-10V), 1 x PT100
Modbus: TCP/IP, RTU
Protocols: SEBA SHWP, SEBA-PS-Delta, RDI/Teledyne ChannelMaster PD19, PD0, OTT SLD, Easy Q, Flow2000, MIO, Quantum, level-online
Output:
analogue, digital: Buscontroller via TCP/IP, Option (25 Ein-/analog-output, digital pro Buscontroller)
Modbus: TCP/IP
Protocols: RS232, RS485, Rotor, GS display, display screen Data transmission to Siemens S7
Casing Material: Plastic ABS
Dimensions: 240x138x55mm (lxbxt)
Display: 320×240 (3,5″) TFT-Color-Display with graphic display of time series (Hydrograph, List) Numerical keyboard with 4 function keys
Protection type: IP40
Fixing: Wall-mounted, 19″ Rack (Optional)
Modem: 3G Modem (GSM, GPRS, EDGE, UMTS, HSPA+)
Frequencies: 800, 850, 900, 1900, 2100 MHz
Sim-Card-Types: 1,8V/3V-SIM-Card
Antenna: with magnetic base: 850, 900, 1800, 1900 MHz
Communications: Push-Protocols: FTP, SFTP, HTTP, HTTPS Push-Format: zrxp, XML Data collection: DDP, XML (TCP/IP)
Alarm: Speech, SMS, E-Mail
Current supply: 9-24VDC
Operating temperature: -30°C – +70°C
Be the first to review “Data Logger NetLogCom” Cancel reply
Related products
Waste Water
Meteorology
Waste Water
Waste Water
Waste Water
Waste Water
Meteorology
Waste Water
Reviews
There are no reviews yet.